The following suspension insulators comply with the ANSI standard. The glaze colors of the insulators are brown or light gray.
Dimensions:
Diameter (D): 11 Inches (280mm)
Spacing (H): 6 1/2 Inches (165mm)
Leakage Distance: 15 Inches (380mm)
Dry Arcing Distance: 8 1/2 Inches (216mm)
Coupling Size: Type K
Mechanical Values:
Combined M&E Strength: 40,000Pounds (178kN)
Impact Strength: 100 Inch-pounds (11.3Nm)
Routine Proof Test Load: 20,000Pounds (89kN)
Time Load Test Value: 24,000Pounds (107kN)
Maximum Working Load: 20,000Pounds (89kN)
Electrical Values:
Low Frequency Dry Flashover Voltage: 80kV
Low Frequency Wet Flashover Voltage: 50kV
Critical Impulse Flashover Voltage, Positive: 125kV
Critical Impulse Flashover Voltage, Negative: 130kV
Low Frequency Puncture Voltage: 110kV
Radio Influence Voltage Data:
Test Voltage RMS to Ground: 10kV
Maximum RIV at 1000 kHz: 50μV
Packing and Shipping Data:
Net Weight, Approximate: 8.1kg
